Handyman Lexington KY is a skilled, versatile professional who can handle a wide range of small jobs. Most specialize in a particular area, such as plumbing or electrical work. They can also recommend more specialized professionals for projects that require permits.
A fish tape is a long, flat ’wire’ that is used to ’fish’ electrical wire and other conduit through a confined space. The flat spring steel design makes it flexible enough to navigate around elbows and turns in the conduit run. A typical fish tape is a quarter inch wide and comes in lengths up to 100 feet. It is usually housed in a donut-shaped case with a handle that allows it to be extended and retracted quickly.
The first step in using a fish tape is to prepare it by unrolling only as much tape as is needed to reach the desired location. Then, the user should carefully feed it through the conduit or hole in the wall. Once the fish tape reaches its destination, it should be anchored to the existing wires with a cable tie.
Choosing the right fish tape is a matter of personal preference and the type of work being done. Generally, nonconductive fiberglass fish tapes are preferable to metal fish tapes for use in situations near live wires. The nonconductive material helps reduce the risk of shock and damage to existing wiring.
Some fish tapes are capable of bending both forward and backward, while others can only bend in one direction. This flexibility is important when dealing with crowded residential walls and ceilings. The length of the fish tape and its tensile strength are also important factors when selecting the appropriate fish tape for a particular job.
It is a good idea to walk off or measure the distance you intend to move the fish tape in advance, so that you know how far to extend it. This will help you avoid over-extending the tape and getting it stuck in an awkward place. It is also helpful to keep a piece of tape or electrical tape handy so that you can mark your intended path. It is a good idea to use a wire-pulling lubricant to reduce friction.
Once you have a good feel for how to use the fish tape, it is time to practice your technique. Start by visualizing the route you will take to get your wire or cable from point A to point B. This will likely involve drilling holes through framing members or structural materials, and may require navigating around existing conductors.
Electrical tape
Electrical tape is a staple of any tool kit and can be used in a wide range of applications. It can insulate wires, protect connections from moisture and dust, and help prevent short circuits. It can also be used to mark or color code wires and cables. For all these reasons, it is a must-have for any handyman. Before purchasing electrical tape, it is important to check its UL approval, temperature ratings, and tensile strength. It is also important to know which kind of materials it can be used on.
Electrical insulating tape is typically made from plastic or vinyl and is used to insulate wires and other materials that conduct electricity. This type of tape is designed to resist factors like heat, moisture, acidity, alkali, and ultraviolet light. This helps to ensure that it will not degrade or become less effective over time. There are many different types of electrical insulating tape available, so it is important to select the right one for each project.
While it is possible to use electrical tape to fix a cut wire, it is only recommended in certain limited circumstances. If a cord is nicked, it is best to replace the wire rather than risk a fire hazard with a tape splice. It is also a good idea to use heat shrink tubing instead of tape if possible.
When selecting electrical tape, handymen should consider its temperature rating, tensile strength, and color coding. It should also be able to withstand humidity and harsh environments. If the tape is not rated for the conditions it will be exposed to, it will not provide the proper insulation and may cause damage to the wiring. It is also important to check if the tape has a UL seal to ensure it meets industry standards.
Using electrical tape can be challenging for beginners, but it can be a real lifesaver when completing a project. By following these tips, you can get the most out of your electrical tape and complete your next project with confidence. If you’re a newbie, start with small projects and work your way up to bigger ones.
Tape measure
The humble tape measure might seem like an ordinary tool to the untrained eye, but for a professional handyman it is a vital part of their kit. It is often used to take measurements and can be found accompanying millions of tradesmen to work every day. It is also one of the most versatile tools in the world, and there are a number of ways that it can be used.
The basic idea of a tape measure is a curved metallic ribbon that can remain stiff and straight when extended, but can also retract into a compact coil for storage. A handyman will need a tape measure for many different jobs and tasks, but the most common use is to mark out lengths of wood, drywall or other building materials. Tape measures come in a variety of lengths, but the most popular is 25 feet (3.66 meters). Some have special markings, such as joist spacing or stud intervals. Some even have dual scales for inches and meters.
To read a tape measure, start at the end with the largest increments (usually inch marks) and work your way down. Each increment decreases in size, so that half-inch marks are smaller than quarter-inch markings, which are smaller than eighth-inch marks, and so on. This makes it easy to see what you are measuring.
Most tape measures also have a hook at the end that can latch onto an object. This can be useful for grabbing nails or screws, but it can also come in handy when trying to determine the height of a surface. Some tape measures have a hole at the end of the hook, which can be used to hang the tool on a belt clip.
The case that holds the blade is another important feature of a tape measure. It will determine how durable and robust the tool is as a whole. Some cases are made of plastic, while others are metal. Some are designed for high-impact environments, and may include a rubber coating. A tape measure that is not protected can be damaged when dropped or bent.
Screwdriver
A screwdriver is an essential tool for any handyman to have. Having the right tool can save time and effort when performing repairs. It can also ensure safety and efficiency by providing the correct fit. Handymen should consider a variety of factors when choosing a screwdriver, including shaft length, tip size and grip material.
The shaft of a screwdriver is the long metal part that emerges from the handle and can be made of tough steel to resist bending. The tip of the screwdriver is inserted into a slotted or hex head screw, and is usually made from high-quality materials such as vanadium steel to minimize damage. The grip is made of plastic, metal or wood. Its design can also vary, such as a straight handle or a curved one. Some screwdrivers have a socket that accepts bits and can be used like a wrench.
There are many different types of screws and screwdrivers, so a handyman should have a wide assortment. The most common are flathead and Phillips head screws. Some screwdrivers can even be used to drill holes in certain materials. Besides the usual screwdrivers, it’s important to have other tools like a utility knife and duct tape. Other useful tools for a handyman include an electrical tester and stud finder, which help maintain safety when working on electric work.
A ratcheting screwdriver is an excellent choice for tightening or loosening large fasteners. The mechanism converts linear motion into rotational motion, making it easier to use than a traditional screwdriver. It can be locked in place so it cannot rotate in the opposite direction, and most have switches that allow the user to change the direction of rotation.
A good quality screwdriver should be made of durable materials that can withstand heavy usage. Its shaft should be shaped to minimize vibration and slippage. It should also have a good fit with the screw to prevent stripping or damaging the screw head. In addition, the tip should be made of hard, corrosion-resistant materials to avoid wear and tear. Some screwdrivers have a shaft that can be changed to accommodate different heads, making it more versatile.